Our promise / one standard for every bike

Verified bikes.
Confident ride.

Every pre-owned bike is inspected before it reaches the showroom. We score six areas out of 100 and show the breakdown with the listing.

What we check

The inspection checklist.

Each listing carries bike-specific readings and notes against these checks.

100total points
6inspection areas
1road test per bike
01

Frame & fork

25 points
  • Frame overall conditionInspect the entire frame under good lighting for cracks, deformation, deep gouges and suspicious repairs.
  • Carbon frame and forkExamine impact areas, tube junctions, dropouts and visible carbon surfaces for damage or repair indicators. Visual inspection cannot rule out hidden damage.
  • Aluminium or steel frameLook for dents, cracks, corrosion, damaged welds, deformation and signs of repair.
  • Fork and steererInspect fork blades, crown, steerer and dropouts for impact damage, cracks, corrosion or deformation.
  • Head tube and bottom bracket areaInspect for cracks, unusual movement, damage around joints and signs of previous impact.
  • Rear triangle and dropoutsCheck stays, dropout alignment, derailleur hanger area and visible damage.
  • Seatpost and seat tubeCheck for slipping, seizure, cracks, excessive insertion marks or damage from overtightening.
  • Frame alignmentLook for obvious misalignment; use appropriate alignment tools or specialist assessment if suspected.
  • Suspension fork or rear shockIf fitted, inspect for leaks, stanchion damage, play and functional response.
  • Suspension service historyRequest records and compare service requirements with the manufacturer's recommendations.
02

Wheels & tyres

20 points
  • RimsInspect for cracks, dents, impact damage, worn brake tracks where applicable and damaged spoke holes.
  • Wheel true and roundnessSpin each wheel and assess lateral wobble, vertical hop and clearance.
  • Hubs and bearingsCheck for rough rotation, excessive play, binding or abnormal noise.
  • Spokes and nipplesCheck for missing, loose, damaged or corroded spokes and damaged nipples.
  • Tyre tread and casingInspect tread wear, cuts, bulges, exposed casing, sidewall damage and ageing.
  • Tyre pressure and retentionInflate within the tyre and rim manufacturer's limits; check for pressure loss and secure seating.
  • Tubeless setupIf applicable, inspect sealant condition, valve, bead seating and leakage. Confirm compatibility.
  • Axles and thru-axlesCheck threads, lever or tool interfaces, seating and secure clamping.
  • Wheel and axle securityConfirm both wheels and all relevant retention mechanisms are secured correctly.
03

Drivetrain

20 points
  • Chain condition and wearMeasure with a suitable chain-wear gauge and record the result.
  • Cassette and freewheelInspect tooth wear, damaged teeth, looseness and unusual skipping under load.
  • ChainringsCheck tooth wear, damage, looseness and chain retention.
  • Front and rear derailleursInspect cage, pivots, mounting, hanger and visible damage.
  • Shifting across gearsTest each gear combination appropriate to the setup and record missed shifts or hesitation.
  • Crankset and crank armsCheck for cracks, impact damage, loose hardware and abnormal movement.
  • Bottom bracketCheck for play, roughness, noise and secure installation.
  • Pedals and cleatsInspect pedal bearings, threads, retention mechanism and cleat wear if included.
  • Freehub and engagementCheck for abnormal play, slipping, roughness or inconsistent engagement.
  • Electronic shiftingIf fitted, test shifting, battery status, connections and error indicators.
  • Drivetrain functionCheck shifting, chain retention and pedal/crank function.
04

Braking

15 points
  • Brake levers and operationCheck smooth operation, return action, secure mounting and appropriate lever feel.
  • Brake padsInspect remaining material, contamination, uneven wear and correct installation.
  • Rotors or rim brake tracksCheck rotor thickness against its limit, warping, cracks and contamination; inspect rim brake tracks where applicable.
  • Hydraulic brakesCheck for leaks, damaged hoses, damaged fittings and abnormal lever travel.
  • Cables and housingFor mechanical systems, inspect fraying, corrosion, routing and smooth operation.
  • Brake alignment and clearanceCheck caliper alignment, pad contact, rotor rub and wheel clearance.
  • Static brake testConfirm both brakes hold the bicycle securely and operate independently.
  • Brake functionConfirm both brakes function correctly before any ride test.
05

Cockpit & fit

10 points
  • HandlebarInspect for cracks, dents, corrosion, deformation and secure mounting; pay particular attention to carbon bars.
  • Stem and faceplateCheck for damage, correct assembly and appropriate torque where specifications are available.
  • HeadsetCheck for play, binding, roughness and smooth steering.
  • Handlebar tape and gripsRecord condition, wear and whether replacement is needed.
  • Saddle and railsInspect for cracks, rail damage, deformation and secure mounting.
  • Seatpost clamp and hardwareCheck function, condition and correct clamping; follow manufacturer torque requirements.
  • Cables, hoses and routingInspect for abrasion, pinching, sharp bends, leaks and interference with steering.
  • Steering and bearing functionConfirm smooth steering without abnormal play or binding.
  • Fastener checkCheck safety-critical fasteners using the correct tools and manufacturer torque specifications where available.
06

Ride test & records

10 points
  • Seller identity and ownershipConfirm seller identity and obtain a signed declaration that they own the bicycle and are authorised to sell it.
  • Frame serial numberPhotograph the serial number and check it against available documents and any relevant stolen-bike records.
  • Purchase documentationRequest the original invoice, proof of purchase or other supporting ownership evidence, if available.
  • Model and specificationConfirm brand, model, model year if verifiable, frame size and component specification.
  • Modification historyAsk about crashes, frame repairs, repainting, component upgrades and major replacements.
  • Included itemsRecord wheels, pedals, charger, battery, accessories, manuals and keys where applicable.
  • Lights, computer and accessoriesTest included electronic accessories and record what is included in the sale.
  • E-bike motor and batteryIf applicable, check diagnostic status, charging, assistance operation and battery health through appropriate tools or records.
  • E-bike charger and keysVerify charger compatibility, battery locking and the presence of keys.
  • Controlled test rideOnly after safety-critical checks pass, test handling, braking and drivetrain operation in a safe area.
  • Abnormal noise or movementRecord creaks, knocking, rubbing, vibration, slipping or other unexplained symptoms.
  • Post-ride recheckReinspect for newly apparent issues, loosened components or fluid leakage.
  • Photographic recordCapture full bicycle views, serial number, frame details, drivetrain, wheels, brakes and every material defect.
  • Defect registerRecord each defect, its severity, evidence and proposed action.
  • Refurbishment estimateList required parts, labour, service costs and any specialist inspection.
  • Purchase economicsCalculate purchase price, transport, parts, labour and expected selling costs before approving purchase.
  • Final inspection recordRecord inspection date, inspector names, test limitations and final decision.
  • Customer disclosureDisclose material known defects, replaced parts, incomplete checks and relevant repair history.
  • Sale handoverProvide agreed inclusions, receipt or invoice and any written terms or warranty offered.

Inspection notes are recorded for each individual bike. The score reflects its condition at the time it was checked.

Transparent by design

See the score.
Choose your bike.

Shop inspected bikes